Printed Pattern Vinyl - Adhesive
- Cut image right (not mirrored) on printed side
- Remove excess vinyl from image
- Place transfer tape (pre-mask) on top of design and squeegee in place
- Flip over and remove back
- Apply to clean surface
Tips & Tricks:
- Clean surface with soap and water; NOT alcohol. Alcohol can leave a slight greasy residue.
- Application spray can be used to help with re-positioning decal before squeegeeing
- Squeegee in place by working from the center fanning outwards
- Remove all air bubbles
- After application, remove mask slowly. If any details start to lift, simply lay mask back in place and squeegee more firmly.